Rail battery powered transfer car manufacturers detail the maintenance of the trolley
2022-04-06
Rail battery powered transfer car manufacturers detail the maintenance of the trolley
Daily attention to maintenance in order to extend the service life of the rail electric handling car. The maintenance of the rail electric handling car is divided into two aspects of electrical and mechanical maintenance, maintenance content is naturally different. Specific look at the rail transfer car manufacturers of the editor for you to introduce what exactly is different.Electrical maintenance of the whole rail electric car: regularly check whether the power connectors of each circuit are tight; regularly check whether the relays and contactor contacts are adhered; regularly check the wear and tear of the car's conductive devices.
Mechanical maintenance of the rail battery transfer car:The gear oil in the gearbox of the flat car should be replaced regularly; the grease in the bearing seat of the flat must be replenished regularly; the motor and the gearbox are driven by a belt. In the course of use, frequently check whether the belt is loose. If the motor base adjustment bolt is loose, the tensioning belt can be adjusted. If it is still loose when adjusted to a larger position, the drive belt is replaced. The motor and reducer are driven by means of a sprocket. During use, lubricant should be added to the chain regularly; the chain should be checked regularly for looseness and the flatcar should be adjusted in time; the flatcar brake should be checked regularly for the working of the brake; the flatcar reducer should be checked regularly to replace worn-out gears or bearings; the wheel set should be checked regularly: observe whether the rotation is flexible and reliable and whether the bearing wear is normal.
Rail battery transfer trolley manufacturers say they need to check daily that the basic condition of the electric flatcar is normal, and to expose and solve some hidden problems in the equipment. This way it will not interfere with daily work. Motors should be serviced on time, usually every three months and once a year. Generally speaking, grease is changed every six months. During the use of the motor, it is often necessary to check the technical condition of the parts on time, and to clean up the dust, water, oil and iron filings and other debris that can enter the body in time to take preventive and control measures.
Facebook
Linkedin
